Vehicle sign vinyl removal
As seen in this clip, the graphic is warmed up, to soften the adhesive, by using a heat gun or a hair dryer, then the QR Tool (quick release tool) can be used to release the graphic from the substrate, the using Rapid Remover all the adhesive residue can be removed quickly and efficiently.
Applying vehicle sign vinyl
The application of this vinyl sign, is made easier with the use of the perfectear 575 application paper, from The Vinyl Corporation to ensure that the sign vinyl retains it’s kerning and proper spacing throughout this process, the use of rapid tack enables the adhesive to adhere to the surface, when desired rather than before you are ready to squeegee it out, the using an Avery Pro Felt squeegee work the fluid from underneath the graphic in an even herringbone shape, to remove all bubbles.
If in any doubt at all, refer to our sign vinyl fitting instructions or for any extra advice about signmaking vinyl or any aspect of fitting or removing sign vinyl, then please call 0115 930 1133. . We are here to help. . .JUST ASK !”
Tags: sign vinyl, signmaking vinyl, vinyl squeegee
